Permanent power fence with high tensile wire

Posted by Gallagher Electric Fence.com on

 

I’m building a permanent power fence with high tensile wire.  Any suggestions?

 

Don’t over tension the wire. Using high-tensile wire allows for greater line post spacing than conventional wire; usually 50 feet as a minimum. Also, don't over-tighten the wires. Make sure it’s a flexible system that allows for wildlife impacts, snow loading, etc.  If you don’t “over-engineer” the fence, you’ll save lots of money. High Tensile fencing Question | Gallagher Electric Fence Energizer


Share this post



← Older Post Newer Post →